home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.19941221-19950208
/
000371_news@columbia.edu_Tue Jan 31 05:00:05 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1995-07-31
|
3KB
Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA27196
(5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Thu, 2 Feb 1995 17:06:33 -0500
Received: by apakabar.cc.columbia.edu id AA19760
(5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Thu, 2 Feb 1995 17:06:28 -0500
Path: news.columbia.edu!news.cs.columbia.edu!news.pipeline.com!swiss.ans.net!gatech!newsxfer.itd.umich.edu!zip.eecs.umich.edu!newshost.marcam.com!news.mathworks.com!uunet!news.iij.ad.jp!wnoc-tyo-news!aist-nara!wnoc-kyo-news!hakozaki.karrn!kyu-cs!MoYun
From: MoYun <MoYun@apex.chem-eng.kyushu-u.ac.jp>
Newsgroups: comp.protocols.kermit.misc
Subject: Re: [ help ] how to set the parameters for terminal Tek4010 ?
Followup-To: comp.protocols.kermit.misc
Date: Tue, 31 Jan 95 05:00:05 GMT
Organization: Falcuty of Engineering, Kyushu Univeristy
Lines: 29
Message-Id: <3gkfv4$4bv@kyu-cs.csce.kyushu-u.ac.jp>
References: <H79055A.95Jan27163932@kyu-cc.cc.kyushu-u.ac.jp>
Reply-To: MoYun@apex.chem-eng.kyushu-u.ac.jp
Nntp-Posting-Host: goro.chem-eng.kyushu-u.ac.jp
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-2022-jp
X-Ecom-Version: 3.01.09 (PC98/PCTCP)
In-Reply-To: h79055a@kyu-cc.cc.kyushu-u.ac.jp's message of Fri, 27 Jan 95 07:39:32 GMT
Apparently-To: kermit.misc@watsun.cc.columbia.edu
In article <H79055A.95Jan27163932@kyu-cc.cc.kyushu-u.ac.jp> h79055a@kyu-cc.c
c.kyushu-u.ac.jp wrote at Fri, 27 Jan 95 07:39:32 GMT:
> Hi:
>
> I tried to use Tek4010 mode to draw graphs, but the graphs could not be
> drawn completely on the display. About four small windows appearred on the
> display and in each window, only three or four lines were displayed.
> I tried to switch off the small windows to a large window but failed.
>
> How can I set the terminal parameters which let the graphs written in
> Tek4010 be shown completely in Kermit?
>
However, after starting the Ms-windows, the tek4010 terminal can draw
graphs normally. Therefore, some graphic initializing are needed.
What kinds of process should be done before the MS-kermit is set up?
Many 286 machines are still used in our lab, so a special treatmet
similar to Ms-windows should be done.
Thank you in advance.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| Tel. 092-641-1101(Ex.5579) |~~~~~~~~~~~
Yun MO, EnD | Fax. 092-651-8616 |
MoYun@apex.chem-eng.kyushu-u.ac.jp | Tel. 092-661-1665(Home) |
------------------------------------------------------------------------------